If you extinguish fires using incorrect methods, you could end up making the fire worse.

There are five different classes of fires, and a different letter is used to identify each one: Class A, B, C, D, and K. It’s important to know the different classes of fires, because knowing the differences between each class helps in figuring how to extinguish the fire correctly. If you extinguish fires using incorrect methods, you could end up making the fire worse. Furthermore, the fire class corresponds to the type of fire extinguisher that’s needed to put out the fire.

The following is a description of each class of fire, including the best ways to put them out.

Class A

Class A fires concern ordinary materials. Examples of such materials include cloth, paper, plastic, rubber, trash, wood, and other things that can catch on fire easily if they are by a heat source. This is the type of fire commonly thought of when it comes to residential fires.

Class B

Class B fires concern flammable liquids. Examples of such include alcohol, diesel oil, lacquers, oil-based paints, petrol, solvents, tars, and other flammable gases. This is the type of fire that can easily begin in a garage.

It is important to use a proper fire extinguisher on Class B fires. Using a Class A fire extinguisher on a Class B fire can actually make the fire spread and cause you to injure yourself. There are, however, certain chemical fire extinguishers that have the ability to put out both Class A and Class B fires. Such fire extinguishers are filled with powder or foam and they are pressurized using nitrogen.

Class C

Class C fires concern electrical equipment. Examples of such equipment include appliances, circuit breakers, computers, motors, plug sockets, servers, transformers, and wiring. You should also be aware of smaller electrical equipment, such as cell phone chargers and computer cords. This is the type of fire that can be found in homes if sourced by old appliances or in a garage if sourced by a car motor or battery.

Don’t use water on an electrical fire because you can suffer from an electrical shock. Knowing this, use only Class C fire extinguishers on this type of fire. Class C fire extinguishers are filled with potassium bicarbonate or sodium bicarbonate and they contain dry chemical fire dampeners. In addition, Class C fire extinguishers can be used on Class B fires.

There are multipurpose fire extinguishers available that can put out Class A, B, and C fires that use a dry yellow powder called monoammonium phosphate. However, such a substance leaves behind an unpleasant residue that can cause more damage if it isn’t immediately cleaned up.

Class D

Class D fires concern combustible metals. Examples of such metals include aluminum, lithium, magnesium, potassium, sodium, titanium, and zirconium. This is the type of fire that’s typically found in manufacturing facilities but can also occur at home if one has these combustible metals around.

Class D fire extinguishers must be used for Class D fires, which are typically found in chemical laboratories.

Class K

Class K fires concern substances often found in kitchens. Examples of such substances include animal oils, fats, grease, and vegetable oils used for deep fryers and other cookers. Water should never be used on Class F fires and neither should a Class A fire extinguisher, because doing so creates a fire ball that’s more dangerous than the original fire. You must use a Class K fire extinguisher to put out these types of fires.

Use this information about the five classes of fire as a reference for how to extinguish a fire properly. Doing so can help save your home or property from extensive damage. If you find that your home or property has suffered damage from a fire that you were unable to extinguish or weren’t around to put out, be sure to seek immediate help from a fire damage restoration service provider. The sooner you act, the sooner the damage can be addressed. Professional restorers will contain the damage, clean up your property, and repair damaged building materials.

About Vince Sandri

Vince Sandri is a content writer and blogger with more than 12 years of experience. His expertise is in creating content related to disaster restoration, including information about preventing and reacting to natural disasters like flooding, water damage, fire and smoke damage, mold growth, storm damage and more.
Vince has been the main contributor to RestorationMasterFinder.com since 2014. Over that time, he has written numerous service pages and blogs for disaster restoration providers featured on RestorationMasterFinder.com. Vince has done extensive research and covered a wide range of topics relating to disaster restoration to help homeowners, business owners, and property managers better protect their property. He understands the problems that disasters like flooding, fire, smoke, and mold can cause as well as the best ways to respond to these issues to limit the damage.
Vince completed his Bachelor of Arts degree at Aurora University and his master’s degree at DePaul University. He has been writing SEO website pages, blogs, and press releases since 2012. Vince is also a musician and can be seen playing in the Chicago, IL area.